commit 04c5e6cf1263d456ab146f50c51c9bb45b9652c1
Author: Tero <tero.huttunen@eternityproject.fi>
Date:   Fri Sep 4 16:07:18 2026 +0300

    first commit

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..db72198
--- /dev/null
+++ b/README.md
@@ -0,0 +1,86 @@
+# ZFS Metadata Eraser
+
+`erase-zfs-metadata.sh` permanently overwrites disk metadata that can identify
+a device as a ZFS vdev. It is intended for decommissioning or repurposing a
+device after it has been cleanly removed from its pool.
+
+## What It Erases
+
+The script performs 10 overwrite passes with zeroes over the first 4 MiB and
+the last 4 MiB of the target block device. These regions include:
+
+- MBR data and GPT primary partition table at the beginning of a disk.
+- GPT backup partition table at the end of a disk.
+- The four conventional ZFS vdev-label regions, including their redundant
+  copies at both ends of the device.
+
+It does not overwrite the entire device. Data outside those metadata regions
+may remain recoverable.
+
+## Requirements
+
+- Linux with Bash.
+- Root privileges.
+- `blockdev`, `dd`, `findmnt`, `lsblk`, and the ZFS `zpool` command.
+- A target device of at least 8 MiB that is not mounted and is not part of an
+  imported ZFS pool.
+
+## Use
+
+First, verify the target device carefully:
+
+```bash
+lsblk --output NAME,SIZE,TYPE,MOUNTPOINTS
+zpool status -P
+```
+
+Then make the script executable and run it with the full block-device path:
+
+```bash
+chmod +x erase-zfs-metadata.sh
+sudo ./erase-zfs-metadata.sh /dev/sdX
+```
+
+Replace `/dev/sdX` with the actual device, such as `/dev/sdb`,
+`/dev/nvme0n1`, or a device-mapper path. Do not use the disk containing the
+running system.
+
+The script displays target details and requires this exact confirmation before
+it writes anything:
+
+```text
+ERASE /dev/sdX
+```
+
+## Safety Behavior
+
+Before overwriting, the script refuses to run when:
+
+- The supplied path is not a block device.
+- The device itself is mounted.
+- A child partition of the device is mounted.
+- `zpool status -P` shows the device in an imported pool.
+- The device is smaller than 8 MiB.
+
+These checks reduce common mistakes but are not a substitute for verifying the
+device identity yourself. The operation is destructive and cannot be undone.
+
+## Prepare a ZFS Device
+
+For a device that belongs to a pool, first use the appropriate ZFS procedure,
+such as replacing or detaching the vdev, then export the pool if necessary.
+Confirm the target no longer appears in `zpool status -P` before running the
+eraser. Do not use this utility to remove a live vdev from an active pool.
+
+## Verify
+
+After completion, inspect the device for residual filesystem or partition
+signatures:
+
+```bash
+sudo wipefs --all --no-act /dev/sdX
+sudo zdb -l /dev/sdX
+```
+
+`wipefs --no-act` reports signatures without modifying the device. `zdb -l`
+should not find a readable ZFS label after a successful run.
\ No newline at end of file
diff --git a/erase-zfs-metadata.sh b/erase-zfs-metadata.sh
new file mode 100644
index 0000000..5d3f9bb
--- /dev/null
+++ b/erase-zfs-metadata.sh
@@ -0,0 +1,65 @@
+#!/usr/bin/env bash
+# Overwrite partition-table and ZFS vdev-label metadata at both ends of a device.
+
+set -euo pipefail
+
+readonly PASSES=10
+readonly MIB=$((1024 * 1024))
+readonly WIPE_MIB=4
+readonly WIPE_BYTES=$((WIPE_MIB * MIB))
+
+usage() {
+    cat <<'EOF'
+Usage: sudo ./erase-zfs-metadata.sh /dev/<device>
+
+Overwrites the first and last 4 MiB of the specified block device ten times.
+This destroys MBR/GPT partition tables and all conventional ZFS vdev labels.
+The device must not be mounted or part of an imported ZFS pool.
+EOF
+}
+
+die() {
+    printf 'Error: %s\n' "$*" >&2
+    exit 1
+}
+
+[[ $# -eq 1 ]] || { usage >&2; exit 2; }
+device=$1
+
+[[ $EUID -eq 0 ]] || die 'run as root (for example, with sudo).'
+[[ -b $device ]] || die "'$device' is not a block device."
+
+for command in blockdev dd findmnt lsblk zpool; do
+    command -v "$command" >/dev/null 2>&1 || die "required command '$command' was not found."
+done
+
+if findmnt --noheadings --source "$device" >/dev/null 2>&1; then
+    die "'$device' is mounted; unmount it before continuing."
+fi
+
+if lsblk --noheadings --raw --output MOUNTPOINT "$device" | grep -q '[^[:space:]]'; then
+    die "'$device' or one of its children is mounted; unmount it before continuing."
+fi
+
+if zpool status -P 2>/dev/null | grep -Fq -- "$device"; then
+    die "'$device' belongs to an imported ZFS pool; export or detach it before continuing."
+fi
+
+size_bytes=$(blockdev --getsize64 "$device")
+(( size_bytes >= 2 * WIPE_BYTES )) || die "'$device' is smaller than $((2 * WIPE_MIB)) MiB."
+
+last_offset=$((size_bytes - WIPE_BYTES))
+
+printf '\nWARNING: this permanently destroys partition tables and ZFS metadata on:\n  %s\n\n' "$device"
+lsblk --output NAME,SIZE,TYPE,MOUNTPOINTS "$device"
+read -r -p "Type exactly 'ERASE $device' to continue: " confirmation
+[[ $confirmation == "ERASE $device" ]] || die 'confirmation did not match; no data was changed.'
+
+for ((pass = 1; pass <= PASSES; pass++)); do
+    printf 'Pass %d/%d...\n' "$pass" "$PASSES"
+    dd if=/dev/zero of="$device" bs="$MIB" count="$WIPE_MIB" conv=fsync,notrunc status=none
+    dd if=/dev/zero of="$device" bs=1 count="$WIPE_BYTES" seek="$last_offset" conv=fsync,notrunc status=none
+done
+
+sync
+printf 'Completed %d overwrite passes on %s.\n' "$PASSES" "$device"
\ No newline at end of file